Adjust Overlap

Previous pageReturn to chapter overviewReturn to Top Next page

 

 

 

 

 

 

 

 

SVDesigner

 

 

The Adjust Overlap menu item allows you to adjust grid and mesh geometry object elevations to eliminate overlap. Other geometry objects can be compared to the currently selected geometry object, causing its elevations to be adjusted.

 

The portion of the selected geometry object affected by this command can be restricted by specifying a closed boundary, which must be a polygon or region geometry object. The boundary can be inverted, so that values outside the boundary are affected (as opposed to those inside the boundary).

 

Elevations can be adjusted up or down based on the user's selection. A thickness value between the two surfaces can be enforced with the Thickness Adjustment option, which defaults to zero.